The drying accelerator is recommended for use in conditions of low air moisture content to reduce the drying time of one - pack polyurethane compositions ZINOTAN , FERROTAN , ALUMOTAN , POLYTON - UR and GOODLINE PU - 15 enamels manufactured by NPH VMP CJSC.
|Ambient air parameters|
|Temperature, о С||Relative humidity, %|
|Note: Conditions with low moisture content in the air are marked with a " + "|
DESCRIPTION OF THE ACCELERATOR
The drying accelerator is a solution of fatty acid salts.
INSTRUCTIONS FOR USE OF ACCELERATOR DRYING
Before using the drying accelerator, thoroughly mix the paint and varnish material (LKM), completely pour the contents of the container with the drying accelerator into the LKM with the mass indicated in the table:
(Paintwork) / weight of paintwork
in a container, kg
|Drying accelerator, quantity
packs 0.4 kg
per container of paintwork materials
|Mass fraction of the accelerator
|Viability of paintwork materials after adding
h, not less
drying time of the coating
|in an open container||in a closed container|
|ZINOTAN / 25 kg||one||1.6||12||24||2 - 4 times|
|POLYTON - UR / 25 kg||one||1.6||2||6||1.5 - 2.5 times|
|FERROTAN / 15 kg||one||2.6||2||eight||2 - 4 times|
|ALUMOTAN / 17 kg||2||4.7||2||6||1.5 - 2.5 times|
After adding the drying accelerator to the paintwork materials, it is necessary to mix the material again until it is homogeneous.
When preparing paintwork materials in quantities different from standard packaging, it is necessary to strictly observe the mass ratio of the components according to the table.
The use of a drying accelerator reduces the pot life of the paint and varnish material, therefore it is necessary to use it within the time indicated in the table.
The drying accelerator is packed in plastic cans.
Storage conditions - in a sealed manufacturer's container indoors at temperatures from plus
10 ° С to plus 30 ° С away from heat sources. Containers with a drying accelerator should not be exposed to atmospheric precipitation and direct sunlight.
The guaranteed shelf life of the drying accelerator in a hermetically sealed manufacturer's container is 6 months.
from the date of manufacture.
When working with the drying accelerator, observe the relevant industry codes and regulations and the precautions noted on the container label.
It is necessary to use personal protective equipment (goggles, masks, respirators) and avoid inhalation of solvents by evaporation and contact with the skin, mucous membranes of the eyes and respiratory tract, use indoors only with sufficient ventilation.
The drying accelerator is a fire hazardous material.