Products of other enterprises
- 16 Discrete Alarm Inputs
- 8 Differential Analog Inputs
- 8 Solid State Relay Outputs
- 4 Serial Ports
- 2 1-Wire® Buses
- VT100, Telnet, SNMP Manageable
- Low Power, Compact Design
MountingRack mounting: 1U. Two units can be installed side-by-side using an optional bracket for standard 19" rack installations. Also supports tabletop, shelf and wall mounting.
Input5VDC, max. 300mA
No separate power supply required as RIO modules are powered from Optima T:LAN unit.
Power ConsumptionLess than 1.5 Watts
ConnectorPower fed to module through the datacom RJ45 jack.
Temperature0 to 50ºC (32 to 122ºF)
HumidityUp to 80 relative humidity (non-condensing)
ConnectorDual RJ45, shielded
TypeOptima proprietary: communication with the first RIO Base module is through the T:LAN Expansion Port. Additional RIO Base modules are daisy chained from the first via their dual RJ45 interface jacks. RIO Expansion modules connect to RIO Base modules via an inter-module base expansion header.
DistanceUp to 10m (30ft)
CablingUTP, Category 5 (wired EIA568B standard straight-through)
ground referenced, triggered by switching to ground or applying a negative voltage
Voltage ToleranceUp to -60VDC
WiringOne contact per pair
Connector25-pair Telco Connector (female)
CablingUTP, Category 3 or better recommended
Contact the seller
Network Monitoring System RIO 1608R8S4B
We recommend to see