Ohmeda Diamond Compatible

Outlets shall be manufactured with a 6 - 1/2" [165 mm] length type "K" 1/2" [12.7 mm] outside diameter (3/8" nominal) size copper inlet pipe stub, which is silver brazed to the outlet body. The body shall be of 1-5/16" [33 mm] diameter, one piece brass construction. For positive pressure gas services, the outlet shall be equipped with a primary and secondary check valve and the secondary check valve shall be rated at a maximum of 200 psi [1,379 kPa] in the event the primary check valve is removed for maintenance. Outlet bodies shall be gas specifi c by indexing each gas service to a gas specifi c dual pin indexing arrangement on the respective identifi cation module. A large color coded front plate shall be used for ease of gas identifi cation and aesthetic appeal. A one piece chromed fascia plate shall frame the outlet. With the back rough-in mounted, the outlet shall adjust from 3/8" [10 mm] to 1" [25 mm] variation in wall thickness. The outlets shall be of modular design and include a gas specifi c 16 ga. [1.6 mm] steel mounting plate designed to permit on-site ganging of multiple outlets, in any order, on 5" [127 mm] spacing. The latch-valve assembly shall be Ohmeda DiamondTM (Ohio Medical) Quick Disconnect compatible and accept only corresponding Ohmeda type gas specifi c adapters. All M.R.I. outlets are manufactured from nonferrous materials. All outlets shall be cleaned and degreased for medical gas service, factory assembled and tested. The outlets are UL listed and CSA approved. Amico products comply with NFPA-99.
Features:
Flow rate exceeds the requirements of NFPA and CSA Accepts only Ohmeda DiamondTM gas specifi c adapters 100 Hydrostatic testing of each outlet and cleaned for medical gas service Indexed to eliminate interchangeability of gas services Up to 1" [25 mm] wall thickness adjustment 360° Swivel Inlet Pipe for easy installation Universal Rough-In Assembly to accept Quick Disconnects or DISS Front Adapters (Can be interchanged at any time) Outlets are also available for M.R.I. use